Progarden Aqua SOLAR 4053 submersible pump, 3, solar, 3000W300V

Progarden Aqua SOLAR 4053 submersible pump, 3, solar, 3000W300V, MPPT, without PV, 660Lmin, 45m, multi-storey clean water Description: Aqua solar 4053 is a professional electric pump powered by photovoltaic panels. The operating principle is very simple: the electrical energy produced by the solar panels powers the electric pump through the MPPT controller included in the delivery set - practically any consumer can be supplied with water without any subsequent cost, apart from the initial investment. The Aqua Solar 4053 pump uses solar energy, so we can include it in the range of environmentally friendly equipment that does not emit any kind of pollutants into the atmosphere. It represents the top range of Progarden pumps and is an ideal option for supplying water for irrigation without the need to connect to the national electricity grid or electricity generators. All that is needed are: pump (included) controller (included) photovoltaic panels (optionally available) plus several sets of accessories necessary for installation (PV connectors, cables, possibly fixing accessories depending on the installation method - these can be purchased for an additional cost). The Aqua Solar 4053 pump is particularly powerful - it can provide a maximum flow rate of 40 cubic meters/hour, and is equipped with a three-phase, brushless (brushless) DC motor that ensures 25% higher efficiency than traditional electric motors. Another innovation of the Progarden Aqua Solar 4053 pump is the fact that the rotor and stator are double insulated, thus operational safety is greatly improved, the motor resistance being ≥ 300MΩ. The pumping system is made of turbines made of stainless steel. Technical data: Power: 3000W Rated current: 10A Max current: 12A Nominal voltage: 300Vdc. Maximum flow rate: 40m 3 /h (660 L/min) Maximum pumping height: 45m Pump diameter: 5” Connection: 3" Rated speed: 3000rpm Maximum ambient temperature: 40 o C Maximum circulating fluid temperature: 40 o C Product dimensions: 130x990mm Packaging dimensions: 920x340x200mm Weight: 30kg Protection level: IP68 Insulation class: F Power cable length: 3m MPPT controller: - manages the electrical energy produced by photovoltaic panels - control the pump start and stop - it has a housing that can be installed outdoors, it is equipped with a cable gland and rubber gasket so that water or dust cannot penetrate inside. - LEDs that display the operating status of the system - keys for starting, stopping and displaying various operating parameters - the MPPT box is equipped with slots to dissipate heat generated during operation - unlike the smaller Progarden solar pumps, this controller does not have a battery input - the pump is powered only by solar panels MPPT controller technical data: Open circuit voltage: >300V DC Maximum no-load voltage: 430V DC Minimum no-load voltage: 70V DC Delivery set: 1 x Aqua SOLAR 4053 pump 1 x pump controller 1 x 2.5m power cable 1 x 2m female solar panel cable 1 x 2m male solar panel cable 1 x pump power cable extension connection kit 2 x level sensors 1 x 4mm Allen key 1 x Phillips screwdriver The solar panel is not included in the delivery set, it must be purchased separately*** Solar panels required for operation: we recommend installing 14 solar panels model: Sunpal SP460M -https://proenerg.com.ro/sunpal-sp460m-72h-panou-fotovoltaic-460w-monocristalin-mbb-half-cut The connection method is: two groups connected in parallel, each group having 7 panels connected in series. ITEM NUMBER : MO4617283905